FEATURES
- Maximum 275.0 kVA, 400 V, 1500 RPM
- 360 litre tank for 8 hrs @ 75% Load
- Industrial brushless alternator with AVR
- Steel baseframe, retention basin & fuel tank with sensor
- World wide after sales service and technical support
- Test report, manuals and electrical drawings supplied
- Modular design, open and silent version available
- Warranty
PERFORMANCE
| Prime power (PRP) | 250.0 kVA |
| Prime power (PRP) | 200.0 kW |
| Standby power (LTP) | 275.0 kVA |
| Standby power (LTP) | 220.0 kW |
| Power factor | 0.8 |
| Frequency (Hz) | 50 Hz |
| Voltage (V) | 400 V |
GENERAL ENGINE DATA
| Genset Controller | |
| Engine brand | |
| Engine model | TAD734GE |
| Cylinders | 6 |
| Speed | 1500 RPM |
| Cubic capacity | 7.15 |
| Air intake | Turbocharged |
| Standard voltage | 24 V |
| SAE | 2-11A½ |
| BMEP | 2500 |
| Cooling | Water |
| Flywheel P.R.P. | 215.4 kW |
| Flywheel Stand-by | 240.4 kW |
EMISSIONS
| TA Luft | Not available |
| TA Luft2 | Not available |
| EPA | Not available |
| Stage | Stage 2 |
GENERATOR DIMENSIONS
| Length | 3200 mm |
| Width | 1140 mm |
| Height | 1780 mm |
| Weight | 2570 kgs |
| Tank Capacity | 360 l |
FUEL CONSUMPTION
| Fuel Cons. at 110% | 60.9 l/h |
| Fuel Cons. at 100% | 54.5 l/h |
| Fuel Cons. at 75% | 44.3 l/h |
| Fuel Cons. at 50% | 32.8 l/h |
| Fuel Cons. at 25% | 18.8 l/h |
SPEED REGULATION
| Electronic regulator | Standard |
| Precision class | G3 |
ENGINE LIQUIDS
| Oil quantity | 29.0 l |
| Antifreeze quantity | 8.0 l |
HEAT FROM ENGINE
| Heat from radiator | 117.0 kW |
| Heat from exhaust | 160.0 kW |
| Heat from radiation | 24.0 kW |
ALTERNATOR
| Brand | MARELLI |
| Model | MJB250LB4 |
| Continuous Power | 275.0 kVA |
| Standby Power | 250.0 kVA |
| Connection | Series star |
| Phases | Three phases with neutral |
| Winding | 12 terminals 50-60Hz Winding M0 |
| Terminal No | 12 |
| IP Protection | 23 |
| Regulator | M16FA655A |
| Precision | 0.5 ± % |
HEAT FROM EXHAUST
| Exhaust temperature | 495 °C |
| Cooling air flow | 190.00 m³/min |
| Combustion air flow | 16.10 m³/min |
| Exhaust gas flow | 33.00 m³/min |
PLEASE NOTE: ALL ratings are approximate and at SEA LEVEL. Engines need to be de-rated for altitude. A rough guide to de-rate performance is 1% for every 100m above sea level. I.e: A 20kVA at sea level is an 18kVA at 1000m above sea level (10% less) etc.