SMARTGEN ACC4100
Description
The SmartGen ACC4100 is a diesel air compressor controller used on Bundu Power mobile compressors for start/stop control, data measurement, maintenance reminders, alarm protection and remote monitoring ("three remotes"). It includes automatic speed regulation based on discharge pressure and a CANBUS (SAE J1939) port for ECU and non-ECU diesel engines.
A 32-bit ARM microprocessor provides precise measurement, set-point adjustment and threshold protection. Most parameters can be set from the front panel; all parameters can be viewed and adjusted on a PC via RS485 or USB.
Functions & Features
- 132×64 backlit LCD with Chinese/English interface
- RS485 MODBUS for remote measure / control / communication
- CANBUS (SAE J1939) ECU monitoring (speed, coolant temp, load rate, fuel use)
- Automatic engine speed regulation from compressor discharge pressure
- 6 analogue sensor inputs for fuel level, venting pressure and temperature
- Protection for high water temperature, low oil pressure, over/under speed, high discharge pressure/temperature
- DPF regeneration support (Euro V / Stage engines)
- Heater, cooler and fuel pump control outputs
- Event log, real-time clock and maintenance scheduler
- IP65 front-panel sealing; DC 8–35 V supply
Remote Communication
- RS485 MODBUS remote measure / control / communication
- SmartGen CMM366A cloud modules (Ethernet, WiFi or 4G)
- PC configuration via RS485 or USB
Remote Communication Modules
Monitor and control your air compressor remotely with SmartGen-compatible communication modules.
View Remote Comms Options Technical Parameters
| Specification | Value |
|---|---|
| Display | LCD 132×64 (backlit) |
| Digital inputs | 5 |
| Analogue inputs | 6 |
| Digital / relay outputs | 6 |
| Communications | RS485 (MODBUS), USB programming, CANBUS SAE J1939 |
| DC supply | 8 V to 35 V DC |
| Panel cut-out | 116 mm × 90 mm |
| Overall dimensions | 135 mm × 110 mm × 44 mm |
| Operating temperature | −25 °C to +70 °C |
| Front protection | IP65 (with gasket) |